| Sizing | Ladies up to 3mm | Gents 3mm and over |
| Smaller | $50 | $60 |
| One size larger | $60 | $70 |
| Each additional size | $15 | $20 |
| Platinum sizing | Triple | Triple |
| 18k – add 20% | | |
| Sterling $10 each extra size | W/G + $10 (rhodium) |
| | |
| Shanks | Up to 3mm | 3-5mm | 6-8mm |
| 1/4 Shank | $150 | $200 | $300 |
| 1/2 Shank | $200 | $300 | $350 |
| 3/4 Shank | $250 | $350 | $475 |
| | |
| | |
| Ring Repairs | | |
| Solder break in ring | $50 | Platinum 3x |
| Solder 2 rings together | $60 | |
| Solder 3 rings together | $100 | |
| Straighten ring and refinish | $40 | |
| Cut 2 rings apart & refinish | $100 | |
| Refinish and/or Rhodium | $40 Y/G | $50 W/G |
| Refinish + Gold Plate | $60 | |
| Refinish + Palladium/Rhodium | $70 | |
| Butterfly insert | $90 | |
| Sizing bumps | $80 | |
| Remove stone | $6 and up | |
| Epoxy pearl | $15 + refinish charge | |
| | |
| Stone Tightening | Includes refinish | Each additional stone |
| Stones in channel | $55 | $15 |
| Baguette | $55 | $15 |
| Center stone | $65 | |
| Side stone | $55 | $20 |
| Fancy shape | $65 | $25 |
| Bezels | $65 | $25 |
| Rebuild Channels | $10/mm | |
| | |
| Head & Set | | Fancy Shape (+15%) |
| .01 – .15 ct | $95 | $110 |
| .16 – .25 ct | $110 | $126 |
| .26 – .50 ct (5mm) | $150 | $172 |
| .51 – .75 ct | $170 | $195 |
| .76 – 1 ct | $190 | $218 |
| 1.01 – 1.50 ct | $200 | $230 |
| 1.51 – 2 ct | $230 | $264 |
| | |
| Setting Stones | Includes refinish | Fancy Shape (+15%) |
| .01 – .05ct | $40 | $45 |
| .06 – .10 ct | $50 | $55 |
| .11 – .25 ct | $58 | $64 |
| .26 – .75 ct | $80 | $92 |
| .76 – 1ct | $95 | $110 |
| 1.01 – 1.50 ct | $140 | $160 |
| 1.51 – 2ct | $180 | $208 |
| Bezels add 20% | | |
| | |
| 14K Lobster Installed | | Refinished Lobster |
| Small | $45 | $30 |
| Medium | $60 | $40 |
| Large | $80 | $60 |
| X-large | $160 | $80 |
| | |
| SS Lobster installed | | |
| Small | $20 | |
| Medium | $25 | |
| Large | $30 | |
| X-large | $45 | |
| | |
| 14K Spring ring installed | | |
| 6mm | $20 | |
| 7mm | $30 | |
| 8mm | $50 | |
| | |
| SS Spring ring installed | | |
| 6mm | $10 | |
| 7mm | $18 | |
| 8mm | $120 | |
| | |
| Prong Repairs | | |
| Retip 1 | $50 | Multiples/$20 each |
| Full Prong | $60 | Multiples/$30 each |
| V-Prong | $50 | |
| Smooth Prongs + Refinish | $50 | |
| Straighten Prongs + Refinish | $50 | |
| | |
| | |
| Head Repairs | | |
| Straighten Head | $45 | |
| Install Head | $50 | |
| Lower Head | $50 | |
| | |
| Chain Repairs | | |
| Solder chain | $20 | $20.00 larger chain |
| Rivet | $40 | |
| Tube | $40 | |
| Figure 8 safety | $45 14k | $30 SS |
| Safety Chain | $80 | $30 SS |
| Supply and solder jump ring | $22 & up | |
| Tighten clasp | $20 | |
| | |
| Pearl Restringing | | |
| No knots | $2.50/inch | $10 min. |
| Knotted | $5.00/inch | |
| | |
| Miscellaneous | | |
| Rush job | $25 | |
| Appraisals | $100/hour | |
| Engrave Inside Ring | $40 | |
| Watch Battery | $12 | |
| Size watch band (flex) | $15 | |
| Size watch band (pins) | $12 | |